All products

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.

Non Return Flap Check Valve, Flange connection acc.DIN EN 1092-2, Face to face acc. DIN EN 558, series 48 (F6), Resilient seated, 100% free opening, Body: GGG50 / EN-GJS-500-7, Bolts: stainless steel A2-70/SS304. Including A2 Drain Plug. Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.