All products

Max. 500 Nm, without Valve Coupling/Squarehead

Straßenkappe DIN 4056, für Absperrschieber WASSER, verstellbar. Unterteil aus glasfaserverstärktem, hitzebeständigem Kunststoff, Oberteil komplett aus Gusseisen GJL-200 (GG20). Deckelsitz konisch. Im Deckel integrierter Kunststoff-Zentrierring zur Vermeidung von Verschleiß und Klappergeräuschen. Stufenlos höhenverstellbar. Oberteil neigbar bis 7°. Abdeckring mit O-Ring zur gleitenden Höhenjustierung und Sicherung gegen Eintritt von Schmutz und Wasser. Deckel aus Gusseisen GJL-200 (GG20) – hochwertiger Korrosionsschutz durch Polyester-Pulverbeschichtung. Sicherheitsbolzen aus Edelstahl (V2A). Temperaturbeständig bis 240°C. Druckbelastung bis 250 KN.

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: NBR, Design according to EN545, Working temperature: 0°C - +80°C. Movement: +/- 25 mm

Internal Threaded,  Body, cover and flap : GGG50,  Ball: steel/cast iron + NBR rubber, Bolts: stainless steel A2-304, Coating: fushion bonded epoxy powder coated  (min 250μm) RAL-5015.

Internal Threaded,  Body, cover and flap : GGG50,  Ball: steel/cast iron + NBR rubber, Bolts: stainless steel A2-304, Coating: fushion bonded epoxy powder coated  (min 250μm) RAL-5015.

Knife Gate Valve, rising stem, PN10 Full Flange Type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Brass, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.

Flanged Gate Valve acc. to DIN EN 1171/DIN EN 1074-1&2 , DIN EN 558-1 Series 14 , Flanges acc. DIN EN 1092, Body, Wedge & Bonnet: GGG50 / EN-GJS-500-7, Wedge fully covered with NBR, Spindle: A4-SS316 (1.4401), Bolts: Stainless Steel A2-AISI-304 (EN-1.4301), Stem nut: Brass, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.

Flanged Gate Valve acc. to DIN EN 1171/DIN EN 1074-1&2 , DIN EN 558-1 Series 14 , Flanges acc. DIN EN 1092, Body, Wedge & Bonnet: GGG50 / EN-GJS-500-7, Wedge fully covered with NBR, Spindle: A4-SS316 (1.4401), Bolts: Stainless Steel A2-AISI-304 (EN-1.4301), Stem nut: Brass, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm