Skip to Content

All products

Sort By Sort By: Featured
[DJ-00-1200-E10-0088ST00] Model DJ Dismantling Joint DN1200 PN10-EPDM

Model DJ Dismantling Joint DN1200 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
5,487.00 €
[PLUVA-15-0200-E16-A2A2ST02] Model PLUVA Plunger Valve, DN200-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN200-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
5,575.29 €
[PLUVA-15-0200-E25-A2A2ST02] Model PLUVA Plunger Valve, DN200-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN200-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
5,815.95 €
[PLUVA-15-0250-E16-A2A2ST02] Model PLUVA Plunger Valve, DN250-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN250-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
7,901.67 €
[PLUVA-15-0250-E25-A2A2ST02] Model PLUVA Plunger Valve, DN250-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN250-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
8,206.51 €
[PLUVA-15-0300-E16-A2A2ST02] Model PLUVA Plunger Valve, DN300-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN300-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
9,556.88 €
[PLUVA-15-0300-E25-A2A2ST02] Model PLUVA Plunger Valve, DN300-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN300-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
10,158.53 €
[PLUVA-15-0350-E16-A2A2ST02] Model PLUVA Plunger Valve, DN350-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN350-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
9,268.08 €
[PLUVA-15-0350-E25-A2A2ST02] Model PLUVA Plunger Valve, DN350-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN350-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
9,867.06 €
[PLUVA-15-0400-E16-A2A2ST02] Model PLUVA Plunger Valve, DN400-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN400-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
11,813.73 €
[PLUVA-15-0400-E25-A2A2ST02] Model PLUVA Plunger Valve, DN400-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN400-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
12,712.20 €
[PLUVA-15-0450-E16-A2A2ST02] Model PLUVA Plunger Valve, DN450-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN450-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
13,011.68 €
[PLUVA-15-0450-E25-A2A2ST02] Model PLUVA Plunger Valve, DN450-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN450-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
13,910.15 €
[PLUVA-15-0500-E16-A2A2ST02] Model PLUVA Plunger Valve, DN500-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN500-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
18,701.96 €
[PLUVA-15-0500-E25-A2A2ST02] Model PLUVA Plunger Valve, DN500-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN500-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
20,065.70 €
[PLUVA-15-0600-E16-A2A2ST02] Model PLUVA Plunger Valve, DN600-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN600-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
29,994.26 €
[PLUVA-15-0600-E25-A2A2ST02] Model PLUVA Plunger Valve, DN600-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN600-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
31,610.69 €
[PLUVA-15-0700-E16-A2A2ST02] Model PLUVA Plunger Valve, DN700-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN700-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
42,021.91 €
[PLUVA-15-0700-E25-A2A2ST02] Model PLUVA Plunger Valve, DN700-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN700-PN25, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
43,887.03 €
[PLUVA-15-0800-E16-A2A2ST02] Model PLUVA Plunger Valve, DN800-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN800-PN16, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
48,011.67 €