Skip to Content

All products

Sort By Sort By: Featured
[WKGV-20-0500-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN500-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN500-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
5,364.00 €
[WKGV-20-0600-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN600-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN600-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
6,551.00 €
Model FCV Non Return Flap Check Valve, DN100-PN10/16, NBR (copy) Rückflussverhinderer- Flap Check Valve.webp

Model FCV Non Return Flap Check Valve, DN100-PN10/16, NBR (copy)

Non Return Flap Check Valve, Flange connection acc.DIN EN 1092-2, Face to face acc. DIN EN 558, series 48 (F6), Resilient seated, 100% free opening, Body: GGG50 / EN-GJS-500-7, Bolts: stainless steel A2-70/SS304. Including A2 Drain Plug. Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
126.29 €
[DJ-00-0050-E16-0088ST00] Model DJ Dismantling Joint DN50 PN10/16-EPDM

Model DJ Dismantling Joint DN50 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
108.83 €
[DJ-00-0065-E16-0088ST00] Model DJ Dismantling Joint DN65 PN10/16-EPDM

Model DJ Dismantling Joint DN65 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
122.00 €
[DJ-00-0080-E16-0088ST00] Model DJ Dismantling Joint DN80 PN10/16-EPDM

Model DJ Dismantling Joint DN80 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
153.00 €
[DJ-00-0100-E16-0088ST00] Model DJ Dismantling Joint DN100 PN10/16-EPDM

Model DJ Dismantling Joint DN100 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
163.00 €
[DJ-00-0125-E16-0088ST00] Model DJ Dismantling Joint DN125 PN10/16-EPDM

Model DJ Dismantling Joint DN125 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
229.00 €
[DJ-00-0150-E16-0088ST00] Model DJ Dismantling Joint DN150 PN10/16-EPDM

Model DJ Dismantling Joint DN150 PN10/16-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
253.00 €
[DJ-00-0200-E10-0088ST00] Model DJ Dismantling Joint DN200 PN10-EPDM

Model DJ Dismantling Joint DN200 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
328.00 €
[DJ-00-0250-E10-0088ST00] Model DJ Dismantling Joint DN250 PN10-EPDM

Model DJ Dismantling Joint DN250 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
463.00 €
[DJ-00-0300-E10-0088ST00] Model DJ Dismantling Joint DN300 PN10-EPDM

Model DJ Dismantling Joint DN300 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
550.00 €
[DJ-00-0350-E10-0088ST00] Model DJ Dismantling Joint DN350 PN10-EPDM

Model DJ Dismantling Joint DN350 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
778.00 €
[DJ-00-0400-E10-0088ST00] Model DJ Dismantling Joint DN400 PN10-EPDM

Model DJ Dismantling Joint DN400 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
863.00 €
[DJ-00-0500-E10-0088ST00] Model DJ Dismantling Joint DN500 PN10-EPDM

Model DJ Dismantling Joint DN500 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
1,113.00 €
[DJ-00-0600-E10-0088ST00] Model DJ Dismantling Joint DN600 PN10-EPDM

Model DJ Dismantling Joint DN600 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
1,674.00 €
[DJ-00-0700-E10-0088ST00] Model DJ Dismantling Joint DN700 PN10-EPDM

Model DJ Dismantling Joint DN700 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
2,353.00 €
[DJ-00-0800-E10-0088ST00] Model DJ Dismantling Joint DN800 PN10-EPDM

Model DJ Dismantling Joint DN800 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
2,725.00 €
[DJ-00-0900-E10-0088ST00] Model DJ Dismantling Joint DN900 PN10-EPDM

Model DJ Dismantling Joint DN900 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
3,753.00 €
[DJ-00-1000-E10-0088ST00] Model DJ Dismantling Joint DN1000 PN10-EPDM

Model DJ Dismantling Joint DN1000 PN10-EPDM

Dismantling Joint, Full Studs, Body: GGG-50 (EN-GJS-500-7), Flange connections acc. EN1092-2: PN10/PN16, Bolts, nuts & washers: hot dip galvanised 8.8 carbon steel, Gasket: EPDM, Design according to EN545, Working temperature: 0°C - +80°C, Coating: Epoxy Coating RAL-5015  min 250  µm  acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.
4,000.00 €