Skip to Content

All products

Sort By Sort By: Featured
[PLUVA-15-0600-E10-A2A2ST02] Model PLUVA Plunger Valve, DN600-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN600-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
29,496.89 €
[PLUVA-15-0700-E10-A2A2ST02] Model PLUVA Plunger Valve, DN700-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN700-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
41,401.54 €
[PLUVA-15-0800-E10-A2A2ST02] Model PLUVA Plunger Valve, DN800-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN800-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
47,329.80 €
[PLUVA-15-0900-E10-A2A2ST02] Model PLUVA Plunger Valve, DN900-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN900-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
63,809.66 €
[PLUVA-15-1000-E10-A2A2ST02] Model PLUVA Plunger Valve, DN1000-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN1000-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
83,926.16 €
[PLUVA-15-1200-E10-A2A2ST02] Model PLUVA Plunger Valve, DN1200-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Model PLUVA Plunger Valve, DN1200-PN10, EPDM. Operation: AUMA Gearbox with Handwheel & ISO Top (ISO-5210)

Plunger -Needle Valve, Body: GGG50 (EN-GJS-500-7), Face to Face acc. EN 558-1 Series 15 (F5) up to DN450. Above DN500-DN1200: 1.5 * DN, Flanges acc. EN 1092-2 RF, Piston: SS-304-A2 (ASTM A351 GR CF8), Connecting Rod: SS-304-A2 (ASTM A351 GR CF8), Crank: SS-304-A2 (ASTM A351 GR CF8), Shaft: F51 Duplex 2205 Stainless Steel (22% Cr - SS ASTM A182 GR F51), Retaining Ring: SS-304-A2 (ASTM A351 GR CF8), Seat Sealing: EPDM (WRAS-DVGW W-270), Piston Guide: Bronze Overlay, Shaft Bushing: Bronze, Cap screws: A4-70 (SS-316), Vent Plug: SS-304-A2, Eye Bolt: C15. Valve Test as per EN-12266-1, Coating: Fusion Bonded Epoxy Coating RAL-5005 (WRAS-DVGW W-270), min 250 microns.
180,297.12 €
[WKGV-20-0050-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN50-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN50-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
289.00 €
[WKGV-20-0065-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN65-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN65-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
326.00 €
[WKGV-20-0080-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN80-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN80-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
369.00 €
[WKGV-20-0100-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN100-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN100-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
455.00 €
[WKGV-20-0125-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN125-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN125-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
567.00 €
[WKGV-20-0150-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN150-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN150-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
695.00 €
[WKGV-20-0200-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN200-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN200-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
896.00 €
Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK. Operation: with Handwheel
1,104.36 €
Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK. Operation: with Handwheel
1,104.36 €
[WKGV-20-0250-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN250-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
1,209.00 €
[WKGV-20-0300-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN300-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN300-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
1,658.00 €
[WKGV-20-0350-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN350-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN350-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
2,936.00 €
Model W-KGV Knife Gate Valve, DN400-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Model W-KGV Knife Gate Valve, DN400-PN10, Knife A4-SS316 (1.4401). Operation: Handwheel (copy)

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK. Operation: with Handwheel
3,395.98 €
[WKGV-20-0400-N10-42A4ST03] Model W-KGV Knife Gate Valve, DN400-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Model W-KGV Knife Gate Valve, DN400-PN10, Knife A4-SS316 (1.4401). Operation: ISO TOP

Knife Gate Valve, non-rising stem, (Semi) LUG type, face to face: EN 558-1 Series 20, Spindle: AISI-420/EN 1.4021 (X20Cr13), Body: GGG40- EN-GJS 400-15, Sealing: NBR , Stem nut: Alubronze, Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.
3,583.00 €