All products

Column stand, floor column, stainless steel construction V2A (1.4301/1.4305), standard operating height to operating axis H=900mm, column stand with internal spindle extension and shaft end with keyway, spindle guide made of RG7. Self-supporting frame construction with stiffeners against transverse and rotational forces, pre-assembled and ready for operation. Rectangular base plate for anchoring to a concrete structure.

Telescopic Underground Spindel Extension kit T3 stainless steel (DIN 3223 C and E), rod stainless steel (1.4301), coupling sleeve (for spindle or shaft) and square protector (according to DIN 3223 C or E) made of AISI 304 stainless steel with stainless steel clip pin. Self-locking in every extension position thanks to a PE sealing sleeve on the square tube. Torques up to 500 Nm. Completely dirt and water repellent.

Tilting Type Swing Check Valve with Hydraulic Damping, Lever and Weight, Flange connection acc.DIN EN 1092-2, Face to face acc. DIN EN 558, series 14 (F4), Body: GGG50 / EN-GJS-500-7, Spindle: AISI-420/EN 1.4021 (X20Cr13), Disc Sealing: EPDM, Body Sealing: welded Stainless Steel A2-AISI-304 (EN-1.4301), Bolts: stainless steel A2-70/SS304. Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270.

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Dismantling Joint, Full Studs, Body: Stainless Steel SS316 (1.4401), Flange connections acc. EN 1092-2: PN10/PN16, Bolts: Stainless Steel SS-316 (1.4401), Nuts: A2-SS-304, Sealing: EPDM, Design according to EN545, Working temperature: 0°C - +80°C. All materials in direct contact with Drinking Water acc. UBA-KTW and DVGW W-270. Movement: +/- 25 mm

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.