Alle producten

Column stand, floor column, stainless steel construction V2A (1.4301/1.4305), standard operating height to operating axis H=900mm, column stand with internal spindle extension and shaft end with keyway, spindle guide made of RG7. Self-supporting frame construction with stiffeners against transverse and rotational forces, pre-assembled and ready for operation. Rectangular base plate for anchoring to a concrete structure.

Telescopic Underground Spindel Extension kit T3 stainless steel (DIN 3223 C and E), rod stainless steel (1.4301), coupling sleeve (for spindle or shaft) and square protector (according to DIN 3223 C or E) made of AISI 304 stainless steel with stainless steel clip pin. Self-locking in every extension position thanks to a PE sealing sleeve on the square tube. Torques up to 500 Nm. Completely dirt and water repellent.

Tilting Disc Terugslagklep met hydraulische demping, hefboom en gewicht, flensen acc.DIN EN 1092-2, Inbouwlengte acc. DIN EN 558, series 14 (F4), Behuizing: GGG50 / EN-GJS-500-7, Spindel: AISI-420/EN 1.4021 (X20Cr13), Klep afdichting: EPDM, Adichting behuizing: Roestvast Staal A2-AISI-304 (EN-1.4301), Bouten: Roestvast Staal A2-70/SS304. Coating: Epoxy Coating RAL-5015 min 250 µm acc. RAL-GSK.

Pas- en uitbouwstuk, Volledige bouten, Behuizing: RVS SS-316-1.4401, Flensverbindingen volgens EN1092-2: PN10/PN16, Bouten: RVS SS316 (1.4401), moeren en ringen: RVS SS304, Dichting: EPDM, Ontwerp volgens EN545, Bedrijfstemperatuur: 0°C - +80°C. Movement: +/- 25 mm

Pas- en uitbouwstuk, Volledige bouten, Behuizing: RVS SS-316-1.4401, Flensverbindingen volgens EN1092-2: PN10/PN16, Bouten: RVS SS316 (1.4401), moeren en ringen: RVS SS304, Dichting: EPDM, Ontwerp volgens EN545, Bedrijfstemperatuur: 0°C - +80°C. Movement: +/- 25 mm

Pas- en uitbouwstuk, Volledige bouten, Behuizing: RVS SS-316-1.4401, Flensverbindingen volgens EN1092-2: PN10/PN16, Bouten: RVS SS316 (1.4401), moeren en ringen: RVS SS304, Dichting: EPDM, Ontwerp volgens EN545, Bedrijfstemperatuur: 0°C - +80°C. Movement: +/- 25 mm

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rubber Expansion Joint, Single Sphere Bellow of nylon cord reinforced EPDM, reinforced steel wire skeleton, Flanges: Stainless Steel SS316L (1.4404), Flanges acc. EN 1092.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.

Rod made of hot-dip galvanized steel according to DIN EN 10240 (alternatively stainless steel), coupling sleeve made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304). Square protector made of GJS400-15, galvanized steel according to DIN EN 12329 and DIN 50961 (alternatively stainless steel AISI 304), suitable for operating wrench DIN 3223 C. Tool-free assembly of the installation kit with the stainless steel clip pin. Connecting pins made of stainless steel 1.4301. Pull-out protection of the rod min. 150 N. Self-locking in every extension position due to PE sealing sleeve on the square tube. Torque specifications according to GW336. Three-part PE protective pipe system with additional ribbed protective pipe, welded centering cap and welded round bell according to GW336. Completely dirt and water repellent. Includes a marking disc usable on both sides (gas and water) and a universal bell sealing insert.